The E-BOOST is a hybrid pushcart combining traditional manual control with motor-assisted power. It allows you to push it manually or use the motor to assist on inclines or longer stretches.

Use the control toggle on the handle to activate or deactivate the motor-assist function. When off, the E-BOOST operates as a standard pushcart with free-rolling wheels.

Yes. The pushcart can be used manually without the battery.

However, motor-assist and electronic functions will be unavailable.

The E-BOOST is not designed to power the entire round on its own.

It provides assistance during difficult sections of the course, such as uphill climbs or long fairways. Continuous use of assist mode will reduce battery duration. For best results, use the assist feature only when needed and allow the pushcart to operate manually on flat terrain.

Remove the battery from the pushcart and connect it to the supplied charger. Always charge in a dry, well-ventilated area and
avoid overcharging.

Battery life depends on course conditions, the weight of your equipment, and how frequently assist mode is used. When operated as intended — to supplement manual pushing — a single charge will comfortably assist for a full round.

The E-BOOST is designed for outdoor use, but it is not waterproof.

Avoid submerging the wheels or battery area in water. Wipe the cart dry after use in wet conditions.

Check that the top toggle is fully set to swivel mode. Remove any MGI E-BOOST User Manual 1.2 19 debris from around the wheel housing and ensure it is lubricated according to the maintenance instructions.

Switch off the unit, remove the battery, and fold the frame following the steps in Section 4. Store in a cool, dry place out of direct sunlight.

Keep the wheel hubs, axles, and folding joints clean and lightly lubricated. Periodically check that all fasteners are
secure. Avoid washing with high-pressure water.